فرهنگ
مدیر بازنشسته
Vickers Hardness Tester
Description
The Vickers hardness test uses a square-based pyramid diamond indenter with an angle of 136º between the opposite faces at the vertex, which is pressed into the surface of the test piece using a prescribed force, F. The time for the initial application of the force is 2 s to 8 s, and the test force is maintained for 10 s to 15 s. After the force has been removed, the diagonal lengths of the indentation are measured and the arithmetic mean, d, is calculated. The Vickers hardness number, HV, is given by:
HV = Constant × Test force / Surface area of indentation
Standard Vickers ScalesMicro-hardness
scales Test force
F (N) Low-force
hardness scales Test force
F (N) Macro-hardness
scales Test force
F (N)HV 0.010.09807 HV 0.21.961 HV 549.03HV 0.0150.1471 HV 0.32.942 HV 1098.07HV 0.020.1961 HV 0.54.903 HV 20196.1HV 0.0250.2452 HV 19.807 HV 30294.2HV 0.050.4903 HV 219.61 HV 50490.3HV 0.10.9807 HV 329.42 HV 100980.7
Standards
BS EN ISO 6507-1:1998,
(BS 427art 1:1961)Metallic materials. Vickers hardness test. Test methodASTM E92-82(1997)e3Standard Test Method for Vickers Hardness of Metallic Materials
http://mhmetall.persianblog.ir/post/10